Results 1 to 7 of 7
  1. #1
    Senior Member
    Join Date
    Jun 2016
    Posts
    196

    How to install Apache 2.4 in Linux?

    Hi guys,
    I'm a newbie in Linux development Environment, someone has suggest me LAMP stack is better for PHP development. So, I install Ubunto 16.04.1 LTS (x64) in my machine. I'm very new to Linux operating system and I want to install and Configure it to run on my system at startup. Please help me to install Apache (start from downloading option)

  2. #2
    Registered User
    Join Date
    Aug 2016
    Posts
    13
    Apache is a Free and Open Source HTTP web server that runs on most UNIX-based operating systems as well as on Windows. As such, it can be used to serve static web pages and handle dynamic content. Recent reports show that Apache is the number one server used in websites and Internet-facing computers.

  3. #3
    Registered User
    Join Date
    May 2016
    Posts
    223
    To install an Apache module, you would typically say –enable-{module-name}. For example, to install SSL with Apache, it is –enable-ssl. To install ldap module, it is –enable-ldap.

  4. #4
    Member
    Join Date
    Sep 2020
    Posts
    49
    Its very easy to install Apache on Linux server, you just need basic knowledge of Linux comands. You can check below steps:
    First you have to run below command:
    # apt-get install apache2
    After that start the Apache process with below command:
    # /etc/init.d/apache2 start

  5. #5
    Registered User
    Join Date
    Jan 2023
    Posts
    134
    Download Apache HTTP Server version 2.4. 16 from Apache Website - (httpd.apache.org)
    Unzip the file httpd-2.4. tar. gz into /tmp directory (/tmp/httpd-2.4.
    Unzip the file apr-1.5. tar.
    Unzip the file apr-util-1.5. tar.
    Move apr and apr-util directories into /tmp/httpd-2.4. 16/srclib (/tmp/httpd-2.4.

  6. #6
    Senior Member
    Join Date
    Jun 2020
    Location
    India
    Posts
    219
    Installing Apache 2.4 on a Linux machine typically involves the following steps:

    1. Update your system: Before installing any new software, it's a good idea to update your system. This can be done by running the command: sudo apt-get update

    2. Install Apache: To install Apache, you can use the package manager of your Linux distribution. For example, on Ubuntu, you can use the command: sudo apt-get install apache2

    3. Start Apache: Once the installation is complete, start the Apache service by running the command: sudo systemctl start apache2

    4. Enable Apache: To make sure Apache starts automatically after a reboot, run the command: sudo systemctl enable apache2

    5. Test the installation: To test that Apache has been installed and configured correctly, open a web browser and navigate to http://localhost. You should see the default Apache web page, which confirms that the installation was successful.

    6. Configure Apache: Apache configuration files are located in the /etc/apache2 directory. The main configuration file is httpd.conf, but most of the configuration is done in separate files in the conf-enabled and sites-enabled directories.

    Please note that the above steps are based on Ubuntu and other distributions may have different commands and package names.

    It's also important to keep in mind that the Apache version and the distribution of Linux you're using can affect the installation process and commands you'll use. It's always recommended to refer to the documentation of the specific version of Apache and Linux distribution you're using.

    For more information you can contact our technical support team.

  7. #7
    Registered User
    Join Date
    Jul 2020
    Posts
    400
    Here's a general guide for installing Apache 2.4 on a Linux operating system:

    Update the package index:
    sql
    Copy code
    sudo apt-get update
    Install Apache:
    csharp
    Copy code
    sudo apt-get install apache2
    Verify the installation by opening a web browser and navigating to http://localhost or http://127.0.0.1. If Apache is installed correctly, you should see a default Apache page.
    Note: The steps may differ slightly depending on the specific Linux distribution you are using. For example, in CentOS, you can install Apache using the following command:

    Copy code
    sudo yum install httpd
    eukhost - Managed Website Hosting Provider
    Affordable Services | 100% Uptime SLA | 24x7 Pro Support
    cPanel Web Hosting | Linux VPS Hosting | Windows VPS Hosting

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

  Find Web Hosting      
  Shared Web Hosting UNIX & Linux Web Hosting Windows Web Hosting Adult Web Hosting
  ASP ASP.NET Web Hosting Reseller Web Hosting VPS Web Hosting Managed Web Hosting
  Cloud Web Hosting Dedicated Server E-commerce Web Hosting Cheap Web Hosting


Premium Partners:


Visit forums.thewebhostbiz.com: to discuss the web hosting business, buy and sell websites and domain names, and discuss current web hosting tools and software.